Home DEEPENING Amphiprion frenatus reproduction at Jesolo Sea Life – Reportage and history

Amphiprion frenatus reproduction at Jesolo Sea Life – Reportage and history

456
0

Amphiprion frenatus reproduction at Jesolo Sea LifeThe first input for a successful reprodution of clownfishes in aquarium is the formation of a couple.

Amtra sconto 20%

This post is also available in: italiano

The history of Amphiprion frenatus reproduction in Jesolo

When some members of the Aquarist team at Jesolo Sea Life noticed that two Amphiprion frenatus became particularly territorial, they started to keep an eye on them. The couple had soon cleaned the internal part of a decorative ceramic to lay eggs on it!

When the tiny larvae inside the eggs started showing distinctive eye spots (8 days after laying, more or less) the ceramic was moved to a smaller tank containing the same water of the original tank. This time we were lucky as eggs were layed on a removable element!

The rearing tank was without filter, mainteined with a 20% daily water change with water from the main system. The tank was syphoned with a very tight pipe used to remove any organic residues on the bottom. Here the ceramic was positioned so that an airpump pushed a big air bubble every 3 seconds which “caressed” the eggs, to simulate the oxigenating process done by the parents moving their fins to aerate the eggs.

To maintain a stable temperature, the tank was placed in a bigger tank filled with water and with a thermostat. This way it was possible to prevent sudden temperature changes which are potentially lethal for larvae.

Amphiprion frenatus reproduction at Jesolo Sea Life - eggs

Eggs hatched usually one or two days after moving them. Once arrived at work in the morning we found a cloud of tiny larvae swimming around the tank. A few eggs failed to hatch and started decaying. A few larvae died soon after hatching, but still there was a good hatching percentage. After making sure that most of the eggs hatched, the cercamic decoration was removed, cleaned and put back into the original tank. Any dead larvae or organic residue was syphoned from the tank being extremely careful not to suck away any live ones, as sometimes they rest on the bottom weighted down by the yolk sac still full.

Larvae Nutrition

Larvae were not fed for 48 hours after hatching. After this time period they were fed with just hatched artemia nauplii. At the beginning we were forced not use rotifers as the first frenatus hatch happened before the rotifers culture was ready. With surprise it was learnt that frenatus can be reared with artemia nauplii bypassing rotifers, probably because of larvae dimension which are slightly larger, for example, than Amphiprion ocellaris ones.

To give you an idea of the quantity of nauplii that were used take a look at the following picture: larvae do not have to make a great effort to find one in prossimity of their mouth!

Amphiprion frenatus reproduction at Jesolo Sea Life

The maintenance was continued with a daily water change and adding nauplii. At this time it was very important to remove the dead nauplii on the bottom, remember, the water is mature but the tank has no filter!

After around a week from hatching, the larvae showed first signs of metamorphosis, and from totally see-through they started showing some colours and a better swimming control. Up to this point the tank was totally empty, now it was time to insert some hiding spots and visual barriers.

It was noticed that mortality rate was really high during the metamorphosis process, only a small percentage of larvae made it through. However, this percentage of survival has been increasing with the increasing team experience! It went from 4 surviving individual to 15-20 per hatch in a very small time.

Organizing the tanks

The parent couple in the meantime kept laying eggs, so a new tank was prepared for moving the ceramic with eggs. During all rearing phases, the larvae and/or little fishes were never fished out the tank, rather the whole tank was moved to minimize the stress. Obviously this was possible because we had many tanks available to use at the same time.

Only when the individuals reached at least 0,5 cm lenght they were moved in a bigger system with a biological and mechanical filter. In the picture below you can see the 3 phases they went through during rearing. In the tank at the top almost adult frenatus were fed 3 times a day, once with live artemia nauplii, the other two with frozen and dry food.

Amphiprion frenatus reproduction at Jesolo Sea Life

This process was possible because of the material availability of a centre like Sea Life, but I think it could be replicated by any hobbyist with a fair level of experience and practice, together with material and time availability of course! The main difficulty when rearing clownfishes at home is the rotifers availability, but in the case of Amphiprion frenatus we managed to bypass their use, which is still essential in rearing Amphiprion ocellaris.

The story goes on with Amphiprion ocellaris

During this experience, a young couple of A. ocellaris started laying in another tank. Here, they initially laid on a live rock under their beloved anemone, which was impossible to remove. The team had the idea to place a small ceramic piece just under the anemone and, after a few days…

Amphiprion ocellaris reproduction at Jesolo Sea Life

Aquarium Systems - Solutions proven by scientists for MORE THAN 50 YEARS

Rispondi

Questo sito usa Akismet per ridurre lo spam. Scopri come i tuoi dati vengono elaborati.