Tunze has finally updated the software on his multicontroller 7096 making it extremely competitive.
Finally it has improved the program “Pulse” by adding the option of entering the ramp time by which you get from minimum power until the pump was pumping at maximum power, this means a lower noise of the program, it is also added a random program pulsing in a range between 0.5 and 3 seconds.
But above all it is now possible, in the “interval” and “sequential” programs, to set the switched off pump(s) to a minimum power, similar to the old program “interval 2” of multicontroller 7095, that was, incidentally, my favorite program.
The only problem right now is that the update is only available for Windows and not Mac, for which the update will be released in the coming weeks. In truth, it’s possibile to use Bootcamp, Parallels, Fusion or any other program to start Windows on your Mac and then update the software from there.
To download the firmware go here: software download
[…] the setting used for the past 3 months. There are 3 modes: pulse, interval and sequential. With the last software update (unfortunately not available yet for Mac), there also is the interval 2 mode. The pumps run with a […]